FIBER-X
BRINGS OLD WOOD BACK TO NEW!
Simply Put - Awesome!
Cedar Shakes & Unpainted Wood Surfaces such as Decks
As environmentally responsible as it gets
For Cedar Shakes, unpainted Wood Decks simply spray on Fiber-X, wait 20 to 30
minutes, and rinse off. You will not believe your eyes! No more harsh bleach or
surface and vegetation aggressive chemicals. Totally removes black mold and
mildew build-up on shakes, regardless of how long it has been there.
Fiber-X is a blend of oxygenators, orange peel solvents, and cross linked
surfactants that actually break the degenerative cycle of drying & decaying wood fibers that begins when environmental factors come into play. When used as directed Fiber-X breaks this cycle by allowing the wood to breath
more efficiently. The orange peel solvents help to penetrate and eliminate any existing wood
destroying bacteria by weakening the cell wall. When the cell wall is weakened or disrupted, it can no longer function. This forces the cell to burst due to osmotic effects (water rushing into the
cell). At this point wood fibers can recapture their shape while continuing to exist in
a harsh outdoor environment.
Fiber-X works by means of oxygenation and should not be mixed with water until
the operator is ready to perform the job. Once Fiber-X is in solution, the
operator will have approximately 1-2 hours before the product has exhausted
itself. Mix up enough so that you will be able to get the product on the
surface within this time. Mix approximately 1/2 to 1 pound of Fiber-X into 1
gallon of water and stir several turns. Complete solubility is not necessary
since Fiber-X will go into solution on it’s own through the oxygenation process. When product has removed pollutant, rinse
with low pressure, 500 - 1000 PSI is all that is required. When using this
product on pressure treated wood we recommend the 1/2 lb to 1 gallon of water
ratio and rinsing with no more than 500 PSI. Higher dilutions and pressures
will cause the surface to ‘fuzz’ up. When this happens it is generally a temporary situation that will correct
itself in a couple of days.
Related Products: For application use p/n 1059 Delavan pump and lance assembly. Use 15 gallon tank p/n 1067. Another option is p/n 1883, 2 gallon pump up sprayer. Always rinse equipment with clean water at the end of each job. To set up other application systems check the EnviroSpec catalog for a large
assortment of direct sprayers, pumps, chemical line and fittings
***Do not use a pump-up sprayer to apply this product.***
Restore produces oxygen when mixed with water causing a build up of pressure and
the container may become over pressurized.
