obc emulsifier
Packaging: One gallon of liquid treats 55 gallons of mixed
detergent concentrate.
OBC Emulsifier is a professional strength detergent additive specifically
formulated for truck washing applications when surface carbon and oil are a
problem. For the absolute very best results always downstream inject your truck wash
using the Allison Super Suds Sucker (p/n 1964).
Related Chemical Products: For faster rinsing adding one gallon of Speed-X 777
to a 55 gallon drum pack is also recommended. Offer customers the add-on service of protecting their vehicles after washing by
applying Wax N Shine. Adding Laurox Lo foam enhancer to a drum pack of detergent makes products dwell
on the surface longer. This is extremely helpful for heavy grease removal (Use with foamer p/n 969410).
Mixing Instructions: Simply add OCB Emulsifier to any mixed 55 gallon drum kit
of alkaline truck wash. After adding the product wash vehicles as stated below.
Washing technique (single step): Coat the surface to be cleaned with using low
pressure. High-pressure wash the surface removing the detergent and released
dirt. Never apply to an area larger than you can wash off prior to the product
drying on the surface. Apply chemical from the bottom upward and rinse from the
top downward.
Washing technique (two step): Apply the first step, which is usually an acid
product, to the surface to be cleaned. Immediately apply the detergent product
on top of the first step product. You will see the pollutant explode from the
surface. High-pressure wash the surface removing the detergent and released
dirt. Never apply detergent to an area larger that you can wash off prior to
the detergent drying on the surface.
Note: It is important to always rinse well and when you think you are done -
rinse again. This should be common practice with all cleaning solutions. Pay
special attention to horizontal surfaces that may trap detergent allowing it to
run down onto surfaces after you have washed them. Examples of where this
occurs would be run-off from tractor roofs and trailer tops. Try not to put
detergent in these areas, if you do be sure to get it rinsed off to leave a
streak free surface.
Make it a practice to always read and insist your employees read and understand
the MSDS that accompanies this product.
CAUTION - Avoid Alkaline Shock: Any detergent product that is applied to a hot
surface stands a chance of producing alkaline shock. The surface is hot - a
strong solution of detergent is applied - the water evaporates from the product
before you have a chance to rinse - all resulting in a dull, streaked or
tarnished surface which is often irreversible. Cool the surface down with water
first then apply the product. On real hot days turn off the burner and wash
with cold water.
Gloss Enhancers have made us famous! Order up a drum pack and see why!
