RUST-AWAY
Removes rust stains from concrete!
Formulated to remove well water rust stains
Rust-Away will do 2 things:
Rust-Away will remove surface rust staining when used as directed. It will also whiten the concrete surface giving the concrete a revitalized “new again” look. Rust-Away crystals are a unique blend of acids and surfactants.
Directions for use:
Mix ¾ to 1 pound of product to a gallon of slightly warm water. Rust-Away is applied through a direct spraying system directly onto the surface
to be cleaned. This product works best when applied to dry concrete. Allow the product to dwell 15 to 20 minutes. This product performs best when it the weather is warm. On sunny, dry days, moisten by covering with a light mist of water to keep the
product active during the dwell period.
Cautions
This product is an acid, wear protective outerwear and be careful not to splash
it onto unprotected skin or eyes.
Not for use on brick containing iron oxide pigments.
Always run a test pattern in an inconspicuous area to be sure.
Related Products
For application use p/n 1059 Delavan pump and lance assembly. Use 15 gallon tank p/n 1067. Another option is p/n 1883, 2 gallon pump up sprayer. Always rinse equipment with clean water at the end of each job. To set up other application systems check the EnviroSpec catalog for a large
assortment of direct sprayers, pumps, chemical line and fittings.
