sil-o-wet
SURFACE PROTECTOR WITH GLOSS ENHANCING SILICONE
EXTERIOR SURFACE SEALANT
Sil-O-Wet surface sealer protects the surfaces you have just washed or restored.
It retards oxidation as well as mildew growth. Use this product to provide an extra level of service and professionalism to
your jobs.
BLENDING INSTRUCTIONS
Sil-O-Wet is used as a sealer on bricks concrete, and tile. For further dilution
through a down stream injector, pre-dilute 1 part product to whichever part
water as shown below:
Bricks…………………...9 parts water
Concrete Floors............4 parts water
Tile Roofs..................... 7 parts water
For direct spray applications dilute 1 part product to whichever part water as
shown below:
Bricks............................50 parts water
Concrete Floors............25 parts water
Tile Roofs..................... 40 parts water
USE INSTRUCTIONS:
Work in small sections to avoid product from drying on the surface before
rinsing. Rinse thoroughly. Because of the unique hardeners used in the
formulation, Sil-O-Wet will remain on the surface for a long period of time.
Applying Sil-O-Wet to the surface after restoring old brick will generally turn
the brick 3-4 shades darker producing a much richer look.
For the absolute very best results downstream inject using the Allison Super
Suds Sucker (p/n 1964)
