barbs for triggerjet guns
PROFESSIONAL
TRIGGER-JET SPRAY GUNS
350 PSI Gun, viton® seals with lance
#1214 36.5” Stainless lance
750 PSI Gun Only
#1212 Spray Gun- Stainless Ball (No LANCE)
#1169 Spray Gun-Ceramic Ball (NO LANCE)
PREMIUM CHEMICAL LINE
Reinforced Poly Tubing
250 PSI Working Pressure
Resistant to Chems, Fuels, Solvents
1/4” Tubing - 250 Working / 750 Burst
3/8” Tubing - 250 Working / 750 Burst
1/2” Tubing - 250 Working / 750 Burst
#2217 1/2” X 100’ ROLL - ideal for roof cleaning
#2637 1/2” X 300’ ROLL - ideal for roof cleaning
3/4” Tubing - 250 Working / 750 Burst
1/4” PRemium Clear Chemical Line
#1167 1/4” THICK WALL CHEM LINE, 100’
#2199 1/4” Standard Chemical Line, 100’
Premium reel & Chemical Hose
Will not kink or collapse!
800 PSI Working Pressure
Great By-pass hose for Unloaders
Great for Hose Reels & Cyclone Chlorine Pumper
The best hose from tank to pressure washer
#3399 3/8” ID, 600 PSI, Price P/F
#3400 1/2” ID, 600 PSI, Price P/F
#3401 3/4” ID, 600 PSI, Price P/F


12V SHURFLO with Premium Valves
#1049 1.4 GPM / 60 PSI / Viton Valves
#1050 1.8 GPM / 100 PSI / Viton Valves
#1671 Allison Chem Induction Pump
#1051 3.0 GPM / 45 PSI / Viton Valve
#1052 3.6 GPM / 45 PSI / Viton Valve
115V SHURFLO with Premium Valves
#1053 1.4 GPM / 60 PSI / Viton Valves
#1054 1.5 GPM / 150 PSI / Viton Valves
#1055 1.0 GPM / 60 PSI / VITON VALVES
#1056 1.6 GPM / 100 PSI / Viton Valves/w-Cord
Repair Kits For SHURFLO Pumps
#1040 By-Pass, Viton, All Models
#1041 DIAPHRAGM KIT, 8000 Series
#1042 PRESSURE SWITCH, 8000, 60 PSI, Viton
#1043 PRESSURE SWITCH, 8000, 100 PSI, Viton
#1044 PRESSURE SWITCH, 2088, 45 PSI, Viton
#1045 DIAPHRAGM DRIVE KIT, 2088 Series
#1046 Check Valve - 8000 Series
#1047 Check Valve - 8020, 8030 Series
#1048 Check Valve - 2088 Series
ShurFLO fittings
WINGNUT SWIVEL - STRAIGHT
HEX SWIVEL - STRAIGHT
WINGNUT SWIVEL - 90°
HEX SWIVEL - 90°
REPLACEMENT SPRAY NOZZLE
Solid Brass
Fully Adjustable
Fits 1/4” Lance
ALLISON CYCLONE CHLORINE PUMP
7 HP Kohler Engine
w/3 Year Warranty
CHLORINE RESISTANT
ALUMINUM BASE PLATE
Guns have 1/2” Inlet - so if you are using a...
...1/4” Chem Line order Brass Barb #1726
...3/8” Chem Line order Brass Barb #1727
...1/2” Chem Line order Brass Barb #1728
TANK TO EQUIPMENT
NON-CRUSHABLE
‘RIBBED’ HOSE
Will not collapse in hot weather or when you accidentally set something heavy on
it.
Most water tanks come standard with a 2” bottom mount female pipe thread bung. (fig.1)
Install a 2” to 1” reducing bushing in that bung. (fig.2 - P/N 28-683W)
Then install a 1” hose barb (fig.3) into the
reducing busing (90 degree barb is P/N PB10B or a straight barb is P/N PB10S)
Then you will install on that barb a 1” Non-crushable hose (fig. 4 - P/N 4531 Sold per foot)
Another 1” P/N PB10S straight barb (fig.5) is installed on the inlet side of our recommended filter
P/N 3799 - (fig.6)
You’ll never have to disassemble the filter to clean it out! Simply turn the red ‘clean-out’ knob and let it run until the water runs clean.
Now in fig.7 we will be reducing the pump side of the water filter (outlet) to
the proper hex nipple. This nipple (figs 8) will be the same size as the inlet side of your pump
(fig.9).
Tyically pumps producing less that 8 GPM have a 1/2” inlet which means that you will need a 1” to 1/2” reducing bushing P/N 28-671 (fig.7) or if the inlet of the pump is 3/4” you will need a 1” to 3/4” reducing bushing P/N 28-672 (fig.7)
Remember the top two ports on a most pressure washer pumps is high pressure -
out to unloader, hose, gun, etc.
Your Authority on High-Pressure Cleaning
CHEMICAL EQUIPMENT & ACCESSORIES