Attaches to

Pump Outlet

ALLISON HIGH VOLUME CHEMICAL DELIVERY SYSTEM

‘PUT IT ON STRAIGHT or DILUTED’

How many times have you been on the job-site and need more chemical than what you injector can deliver? I know the frustration because I have been there as well. With this high volume chemical delivery system all you need is a 12-Volt battery like the one you already have on your pressure washer and the right EnviroSpec chemical.

Pump Outlet

Pump Inlet

Attach to outlet side

of unloader or coil.

When you want ‘straight’ chemical turn this valve to ‘off’ position.

Out to lance/nozzle

Attach to Pump Inlet

Out to Chemical

In the ‘off’ position is ithe same as ‘releasing’ the trigger gun and by-passing the water allowing 100% chemical to enter the pressure hose.

Pump On-Off Swtich

#1963

RTG Injector

#2072

Injector

w/Shut-Off

RED to positive

side of battery &

White or Black

to ground.

2070 Complete System w/Shut-off Valve Inj.

2071 Complete System w/o Shut-off Valve Inj.

2072 Injector with Shut-off Valve

1963 Injector w/out Shut-off Valve

1671 Pump Only (no barbs)

chemical injection

downstream, specialty chem nozzles & foamers

SUDS SUCKER

Allison

SUDS SUCKER

SUPER SUDS SUCKER

Ready-to-Go Stainless

● ALLISON / STAINLESS CONSTRUCTION

● 27% Max Draw Rate

● Includes, QC’s, Chem Line and Filter

2075 3-5 GPM Non-Adj.

2076 5-8 GPM Non-Adj.

2077 3-5 GPM Adj.

2078 5-8 GPM Adj.

Ready-to-Go Brass

Allison

ECONOMY INJECTORS

● Allison economy bleach injectors

● 24% Draw rate

● Brass with ceramic acid ball

1511 2-5 GPM, Non-Adj.

1512 5-8 GPM, Non-Adj

Allison

DOUBLE-GULP INJECTOR

● ALLISON / BRASS CONSTRUCTION

● Use this injector when you are either pulling 2 chems at the same time (maybe bleach & soap) or connect together for max chem draw.

● 27% Max Draw Rate on 1-side

● Up to 35% using both sides

Non-Adjustable

1737 2-5 GPM, Non-Adj.

1739 5-8 GPM, Non-Adj.

1740 Kit for Both

Allison

2-IN-1 ADJUSTALBE

ROBO-CHEM INJECTORS

● ALLISON / BRASS CONSTRUCTION

● When one stops working close off that side - move the chem pick-up line to the other barb

and you are off and washing again!

● 27% Max Draw Rate either side

Adjustable

1736 Adjustable, 2-5

1738 Adjustable, 5-8

1740 Kit for Both

Allison

● Made by InterPump

● 15% DRAW RATE

1135 2.2-4.0 GPM, Adjustable

1136 4.0-5.6 GPM, Adjustable

1137 5.6-10.9 GPM, Adjustable

1138 Kit for All

ALLISON M-16 THRUSTER

Reaches 3-4 stories from the safety of the ground!

Want to go even higher than 3 stories?

Simply connect the thruster to a Telescoping Lance!

Then throw up to 5 stories high!

• Push for Fully Adjustable Soap from 0º to 65º

• Pull Back for Adjustable High Pressure from 0º to 65º

Comes Standard with:

50’ of Chemical Line

Premium Stainless/Brass Filter

#1992 3.5 Nozzle

#1993 4.0 Nozzle

#1994 4.5 Nozzle

#1995 5.0 Nozzle

#1996 5.5 Nozzle

#1997 6.0 Nozzle

#1998 6.5 Nozzle

#1999 7.0 Nozzle

#2000 8.0 Nozzle

Attaches to end of A Lance

Allison

Allison

ALLISON ‘BANSHEE’ CHEM-SHOOTER

● The Allison Chem Shooter Long Distance hemical Inj. attaches to the end of the lance.

● Includes 3-each high impact laser nozzles for both distance and high volume chemical.

● Fully adjustable for ‘waste-free’ chemical application.

● Material: Stainless Steel body with Chlorine Ball.

● Includes 100’ of clear chemical line & premium chemical filter.

#BCS58 3-10 GPM - Includes Injector & Noz. Set

#5555 Nozzle Set - in injector

#1439 Repair kit includes ceramic ball

HIGH IMPACT NOZZLES

Set includes: 0040, 50 & 60

Allison

Allison

● 3-each interchangable nozzles for long distance to higher detergent volume.

The industry’s #1 selling chemical injector

● Draws up to 33%

● Draws Chemical with as

much as 300’ of HP hose

● Works on machines

from 2 GPM to 10 GPM

1964 Injector only

1963 Ready-to-go injector (see above picture)

1439 KIT

Allison

● ALLISON / STAINLESS CONSTRUCTION

● 27% Max Draw Rate

● With Ceramic Ball

1140 2-5 GPM, Non-Adj.

1141 5-8 GPM, Non-Adj.

1142 2-5 GPM, Adjustable

1143 5-8 GPM, Adjustable

1439 Kit for all

FOAM CANNON

● These foamers attaches to the end of the wand where you will run a 1/4” line back to the chemical source.

● Throws a thick foam for deep cleaning action.

● Works on systems up to 6.6 GPM

● Rated for 3,000 PSI

● Order with or without bottle

1273 With Tank

1273-N Without Tank

ALLISON FOAM TURBINE

● The New Allison Foam Turbine develops an ‘aerated’ wet foam. It has a detachable spray nozzle that once removed will provide you with a 0° nozzle that reaches up to 30’.

● Comes standard with an ‘aerating’ chemcial injector. One barb goes to chemical and the other barb is used to induce additional air into the Turbine when more foam is required.